The Shimano PD-M520 SPD Pedals feature a classic double-sided SPD design at an affordable price.

• Adjustable tension


• Open design avoids clogging


• Strong Cro-Moly axle


• Sealed cartridge bearings


• Black or White


• Compatible with Shimano SPD cleats (one pair of SM-51 single release included)


• 380g/pair (without cleats)

Note: These are compatible with Shimano SPD cleats (two-bolt side-to-side), not with SPD-SL or SPD-R systems (3-bolt triangle pattern).
--

The Shimano PD-M520 SPD Pedals feature a classic double-sided SPD design at an affordable price.

• Adjustable tension


• Open design avoids clogging


• Strong Cro-Moly axle


• Sealed cartridge bearings


• Black or White


• Compatible with Shimano SPD cleats (one pair of SM-51 single release included)


• 380g/pair (without cleats)

Note: These are compatible with Shimano SPD cleats (two-bolt side-to-side), not with SPD-SL or SPD-R systems (3-bolt triangle pattern).

Pedal Envy

More than just a trusty platform for stomping landings and railing around berms, the Atlas Pedal has long been Race Face's top contender. It's strong, thin, concave, lightweight, rebuildable, and ideally suited for getting wild in the woods.

Specs

Axle Material	Chromoly Steel
Body Material	6061 Aluminum
Material	6061 Aluminum
Platform Height (MM)	14.5
# of Pins	20 SHCS hex traction pins per pedal (10 per side)
Platform L x W (MM)	114 x 101
Weight	355g

The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle.

FEATURES

• 10 rear loading Steel pins / side, with Nyloc nuts
• DU plus cartridge bearing axle system
• Thin leading edge chamfered design to deflect off obstacles
• Wide platform design for increased stability
• Contoured shape provides ultimate connected feel

 

SPECS   

INSTRUCTIONS
Install with 6mm Hex or 15mm pedal wrench. Torque to 35Nm (25 ft-lbs) Min

SM-SH51 SPD CLEAT SET (PAIR) SINGLE RELEASE W/ CLEAT NUT

 

 

The new Shimano XT PD-M8120 SPD pedals offer legendary SPD Trail performance that improves the rider experience at this vital connection point. With increased stability and contact area over the previous generation, power, control and confidence are improved. These pedals feature a 11.7% more pedal to shoe contact over the previous M785 pedals, plus a 3.3mm wider pedal platform. An open binding design easily sheds mud while maintaining solid contact with your shoe. SM-SH51 SPD Cleats included. Sold as pair.

Weight: 438 grams

Features:

• Dial your fit with Spoon flat pedals available to fit from kids sizes US 6 and under through to adult US Size 11 and upwards
• Forged Chromoly axle which delivers strength and durability
• 16mm-12mm concave profile with 20 preassembled steel pins for added grip
• Shot-peened and anodized to enhance fatigue life
• Recommended for: ASTM 5, All mountain, Trail, Enduro, free ride, DH, E-Bike 

Specs:

Features:

• Dial your fit with Spoon flat pedals available to fit from kids sizes US 6 and under through to adult US Size 11 and upwards
• Forged Chromoly axle which delivers strength and durability
• 16mm-12mm concave profile with 20 preassembled steel pins for added grip
• Shot-peened and anodized to enhance fatigue life
• Recommended for: ASTM 5, All mountain, Trail, Enduro, free ride, DH, E-Bike

 Specs:

A party's just not a party until Chester shows up. This burly nylon composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing.

Like a good trail dog, the Aeffect Pedal is most in its element on a flowy section of backwoods Nirvana. Designed with a smaller body, this strong, durable, rebuildable pedal is made to chase stoke all day long.

Minimal profile, concave platform pedal has 10 adjustable pins per side for maximum grip. Stamp pedals are optimized for different shoe sizes by providing both Large and Small.

• Premium internals: outboard/inboard igus II glide bearing and double seal system
• Forged aluminum body and Chromoly spindle
• The left pedal is indicated by a small grooved line around the threads of the spindle
• 5 year manufacturer's warranty

Stamp 1 pedals feature and optimized surface area for shoe/pedal interface for the entire range of shoe sizes.

• Hex traction pins (10 per side) mounted from back
• Premium bearings and double seal system
• 5 year warranty
• Large pedals are recommended for shoes sizes 10-15 (43-49)

Concave platform-clipless pedal with mud shedding 4-sided entry is designed for enduro riding and racing. Mallet Enduro pedals feature 6 adjustable pins per side, ribbed body for better traction when not clipped in and chamfered leading edges help reduce rock strikes

• Premium internals: outboard Enduro cartridge bearing, inboard igus II glide bearing and double seal system
• Aluminum body, Chromoly spindle and Cast Steel wings
• Brass cleats and plastic shims included
• Integrated traction pad technology to optimize cleat engagement and shoe tread interface with pedal body
• The left pedal is indicated by a small grooved line around the threads of the spindle
• 5 year manufacturer's warranty

Spindles are each 5mm longer than Crank Brother's standard spindles to provide a wider Q-factor.

• Compatible with 2010 - present Egg Beater, Candy, Mallet, 5050 and Double Shot pedals
• Includes 2 long spindles, and premium internal components