All the same great features of our Spark Pucks, but with 3° canting for reduced knee strain. Near infinite adjustability for splitboards with inserts. Quick mounting with super fine foot placement, angle, and toe/heel centering adjustments.

Weight: 11.36 oz/pr (322g)

The perfect solution for splitboard skins

Increase foot warmth and comfort on long tours with our Baseplate Padding Kits. Made of durable and grippy EVA foam. 3M peel and stick adhesive keeps pads firmly in place. Ideal for long days on the skin track or firm riding conditions.

Six versions: Cutout (for Magneto, Arc, Women’s Arc, Arc Pro, Women's Arc Pro & Burton Hitchhikers) and Solid (for AfterBurner, Surge, Women’s Surge, Surge Pro, Women's Surge Pro).

Average Weight: 0.67oz/pr (19g)

Jones Nomad PRO Skins are the ultimate high performance splitboard skins in any snow condition.

The Nomad Pro skin fibers are a blend of 70% Mohair and 30% Synthetic Nylon fibers. This combination of natural and synthetic fibers provides the perfect balance of glide, grip and durability. Nomad Pro skins are PFC-free and have been coated with both Bluesign-approved EVER DRY 3.0 Anti-glopping treatment to improve wet snow performance and GLIDE TECH treatment which helps maintain the glide for the lifetime of the skin. Jones Nomad PRO Skins are also laminated with RUBBER SAFER SKIN backing. This rubber layer keeps the skin from absorbing water and makes the skins easier to pull apart. Nomad PRO skins are available in two models: Trim-To-Fit with Universal Tail Clip and Pre-Cut with Quick Tension Tail Clip. The Quick Tension Tail Clip adjusts in seconds, provides the perfect skin tension and is compatible with all Jones splitboards 2016 and newer.

PRIME-X OVERVIEW

Included: Bindings, Interface Kit (Ride Mode 2.0, Tour Mode, DualSpeed Riser w/ Heel-Lock)

NOMAD-W OVERVIEW

NOMAD OVERVIEW

Included: Bindings, Interface Kit (Ride Mode 2.0, Tour Mode, DualSpeed Riser w/ Heel-Lock)

THE TOUGHEST SNOWBOARD BOOT ON THE PLANET.

Built with the experienced backcountry snowboarder in mind, the ultra-tough K2 Aspect is the splitboard and backcountry snowboarding boot for accessing any terrain.

Responsive, rugged, and loaded with premium features, the K2 Aspect is a stiff-flexing snowboard boot built atop of a burly Vibram® Mountaineer outsole. A traditional lugged sole with Vibram® rubber offers unparalleled grip and is compatible with a semi-automatic cramp-on. 

The exterior of the boot is just as burly as the outsole. A reinforced abrasion-resistant rubber toe box is complimented by a full-grain leather upper. The Aspect snowboard boot also features our Endo™ 2.0 construction, a tough and abrasion resistant posterior that helps retain the boot’s original flex and shape.  

Inside, a snow-camp ready liner makes this the perfect partner at the firepit. Our Intuition® Pro Foam Liner features a molded PU casing, allowing you to dry your shells out and keep your feet dry while you wait. The Aspect’s liner is heat-moldable to keep your feet comfortable for those long days in the skin track, and also features our heat-reflecting SpaceHeater™ material. 

For performance that you can adjust on the fly, we’ve leaned on our Conda™ heel retention system, powered by BOA® - allowing users to adjust the exact angle of their heel hold on the fly. Lace locks at the instep of the shell are the cherry on top, giving confidence boosting peace of mind that your boots will stay tight and secure on the most challenging descents. 

BEST FOR:

   

TECHNOLOGY

TRADITIONAL LACING:

No wires, reels, or pulls needed. Our braided textile laces offer a tried and true feel and customizable fit.

CONDA™ BOA® LINER LACING:

A BOA® Fit System powered heel retention system built to gentle hug the riders ankle and eliminate heel lift.

VIBRAM® MOUNTAINEER OUTSOLE:

The Mountaineer outsole is the first of its kind. An outsole designed specifically for snowboarding and the mountaineering that is required to get to those larger-than-life lines. With Vibram® rubber and a traditional lug design, this crampon compatible outsole is built to work with all the gear you need.

INTUITION® SPACEHEATER:

A liner designed for comfort and warmth, from start to finish. It features reflective heat blanket panels that work to trap heat in and keep cold out. These reflective heat blankets work alongside heat moldable Intuition® foam, internal J-Bars, and 3D molded, dual- density EVA insoles to keep your foot comfortable and warm all day long.

FULL GRAIN LEATHER UPPER:

Full grain leather provides premium durability and wear while Endo™ 2.0 helps to retain flex and durability over the lifetime of the boot.

ENDO™ 2.0 CONSTRUCTION:

A tough and abrasion resistant heel-counter that helps retain the boot’s original flex and shape throughout the lifespan of the boot. 

3D FORMED DUAL DENSITY EVA FOOTBED:

3D formed to match the contour of your foot and provide all day comfort and support.

INTEGRATED LACE LOCKS:

Lace locks at the 45° give peace of mind that your boots will stay tight and secure on the most challenging descents.

CRAMPON COMPATIBLE (SEMI-AUTOMATIC):

Compatible with most semi-automatic crampons for confience on the most trecherous terrain.

A favorite of hard-charging riders everywhere, the Cardiff Bonsai is an artfully sculpted freeride board that’s streamlined for the purest expression of a turn.

A pure expression of freeride performance, the Cardiff Bonsai was designed around the desire for a simple and streamlined board that could handle it all—it has raced in boarder cross events, carves spring corn, and offers incredible performance in deep conditions. The Bonsai features Cardiff’s FLOATilla construction, which combines a big, wide nose with the gradual rocker of HALFcamber™ to create a shorter board with increased float. Original artwork by Sam Bawden features the gnarled and resilient bristlecone pines found along the high ridgelines of Cardiff’s home Wasatch Range—trees that experience and endure an incredible range of winter conditions.

The Best Snowboard for: Trees, Steeps + Open Bowls

The Eclipse snowboard, featuring a pow centric, Directional Multi Radial Camber-Rocker profile with a wide nose and half-moon narrow tail, will float effortlessly in powder, is nimble in tight trees, is stiff enough to hold an edge through chatter and crud, and is fast enough to keep you on top all day long. The board's waist width is slightly narrower than our Backwoods to accommodate smaller feet and is topped with our Rugged Topsheet made from castor bean oil to add durability/snow-shedding, a top of the line Sintered Base adds unrivaled speed, and our poplar/bamboo wood core adds sustainably harvested pop and stability. It's truly a one board quiver for those that prefer trees, powder, and open bowls.

Featuring rad artwork from Bellingham, WA athlete/artist Brooklyn Bell, a portion of the proceeds from this board will be going to continue funding AIARE avalanche education scholarships.

Designed in Colorado, Manufactured at GP87
Artwork by: Brooklyn Bell

 Features:

• Camber - Directional Multi Radial Camber-Rocker
• Core - Poplar/Bamboo
• Carbon Reinforcement - Tip to Tail 
• Topsheet - Rugged Polyamide
• Karakoram Ultra Clips 
• Base - Sintered 4000
• Layup - Tri-axe Fiberglass
• Sidewalls - UHMW PE
• Stitched Tips
• Forged Tips
• Split Tech 
• Rooted Inserts 

The Hovercraft Split is purpose built to surf the earth and features a directional shape that truly shines in the backcountry.

It's nimble, squat outline provides the float of a much longer board, and the short running length makes it super maneuverable in the tight trees and skinning up. The blunt nose and directional rocker of the Hovercraft keep you surfin' on top of the soft stuff, while the stiff tail keeps you stable through any unexpected crust. For added edge grip on icy skin tracks or firm descents, the Hovercraft Split features Inner/ Outer Traction Tech 2.0 edges. Fresh for 21/22, the Hovercraft has a new look with a refined Engineered Veneer Topsheet and a black + transparent base plus laser etched topsheet markings that eliminate all solvent inks. Without any inks on the board, not even the sidewalls, the new Hovercraft is the most sustainably produced board we've ever made! We've also upgraded the Hovercraft Split's clips to the stronger and lighter Karakoram Ultra Clips 1.0.

Technology

Highlights

Biax Fiberglass

A dual-direction, dual-layer, stitched fiberglass laminate that provides a fun, forgiving and snappy ride.

Premium sintered base

Life's too short to ride slow bases! All our boards have hyper fast sintered bases made from super durable and wax absorbant premium P-tex. See the tech features for specific base details.

Factory tuned, ready to shred

Buy it, mount it, rip it! All boards leave the factory ready to ride with de-tuned tip + tail, edges angled at 90°/0° and bases waxed with Wend natural wax.

Forever Flex

Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.

Sustainably made, built by the sun

We strive to make gear with the least carbon footprint possible. All boards built with Bio Resin, recycled sidewalls + edges and sustainably sourced woodcores + topsheets. Jones boards are also now built with 100% solar power!

Inner/Outer Traction Tech edges

Lock in up and down. Traction Tech on inside and outside split edges improves grip on icy skintracks or firm descents.

Sustainably sourced woodcore

All Jones woodcores are made from wood species that have been sustainably grown and harvested. See the tech features page for more details.

Quick tension tail clip

Jones exclusive climbing skin tension system that attaches to pre-cut tail notches and eliminates the need for a traditional skin tail clip.

• Shape Tech
• Profile
• Features

1. Inside & outside Traction Tech 2.0

Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Inner edge Traction Tech

Inner edge Traction Tech improves splitboard edge grip on ascent. Three sidecut bumps on each side of your binding keep your locked in on icy skin tracks no matter which way you are traversing.

2. Progressive sidecut

At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

3. Quick Tension Tail Clip

Built-in climbing skin tension system using pre-cut notch that eliminates the need for a traditional skin tail clip.

Directional flex pattern

Off set tip-to-tail flex pattern that is designed for directional freeride boards. The nose, center of board and tail are slightly different stiffnesses to help lift the nose, sink the tail and improve stability at speed.

V-core

Jones exclusive wood core profiling that offers a stable and playful board feel. The wood core is softer between the feet for easy turn initiation and stiffer in the nose and tail for stability riding through uneven terrain and landing airs.

Blunt nose

How a board glides in powder, crust, corn or any snow more than an inch deep, is dictated by it’s front contact point and just past it. Next time you are in soft snow watch how much snow comes over the corner of the nose near the contact point. The billowing snow coming out from behind the tip means you are plowing through it which is obviously slowing you down. By adding a blunt nose you get the float benefits of a much longer nose without the ‘snow plow’ rounded tip and it’s extra swing weight. - Jeremy Jones

Like its fearless and nimble namesake, the GOAT dwells in the steepest and most rugged terrain out there. This responsive big-mountain charger lays down surfy, high-speed turns, grips on icy sidehilling, and will take you where no other board dares to go.

Five years of testing and refinement, ten different iterations, and an untold number of days, mountain ranges, and descents. The Goat - our big-mountain charger that Bjorn Leines called the best board he's ever ridden - is the first board we ever started working on and is now better than ever. Available this season for the first time as a solid, the Goat was developed and tested as a split that can tour and engage on icy sidehills, make surfy, high-speed turns, and take you down big, intimidating lines the world over. Our patent-pending HALFcamber60 design (with camber underfoot on 60% of the deck) and RADIcAL Sidecut puts more edge on snow while touring and descending, while still maintaining premium flotation on deep lines. BOARDERpatrol technology uses poplar stringer which fuses with the UNIwall seamless urethane sidewall to reinforce the edge and provide an incredibly damp ride. Kyson Dana created the original artwork, featuring the fearless mountain denizen who inspired this board and shares its habitat in the steepest, most rugged mountain terrain out there.

Your favorite power fish has just been filleted into a fast climbing adventure vehicle. A long floaty nose and wide body float pow efficiently and effortlessly. The powerful poppy contact maximizing “whale tail technology” maneuvers with agility in steep or tight technical terrain and hooks up solidly when things get tight and icy out there. Built in our ultralight SC construction with FSC certified aspen and paulownia core this Orca moves well through gravitational forces. A rugged, fast sintered base, 3-D integrated tip inserts and Karakouram ultra clips round out this whale of a split board.

SPLIT ORCA VOLUME SHIFT: 3CM REDUCTION FROM YOUR NORMAL BOARD SIZING

• THE ULTIMATE DIRECTIONAL PILLOW BLASTER SPLIT
• POW AND BACKCOUNTRY
• EASY TO USE HIGH TENSION KARAKORAM ULTRA CLIPS

Big mountains beckon and this splitboard sets the standard for hard-charging control in remote terrain.

Splitboard-ready boots with traction, flex, and warmth that improve the climb up and the ride down.

The Best Splitboard for: Pillows, Trees + Freestyle Pow

Skin Compatibility: Due to this splitboard's unique shape, we've added tail notches for skin attachment and is best paired with Pomoca skins and our Weston Tail Clips.

The Hatchet is our versatile weapon of mass pow slaying destruction and designed to be ridden much shorter than your average snowboard. To do this, we've increased the surface area to provide you with additional float that you'll need while the reduction in length will keep you nimble. Featuring a Directional Twinish Shape, the splitboard is just ever so slightly tapered and the nose just a touch longer than the tail, but the stance is centered on the camber. The combination of those features creates a blend that allows for additional float in pow while balancing the twin features that are ideal for landing and riding switch without sacrificing too much float. On this splitboard we also use our Rugged Topsheet made from castor bean oil to add durability/snow-shedding. A Multi Radial Twin Camber profile provides maximum pop and edgehold while S Weave Carbon that weaves from base to topsheet and back to the base increases pop further. We utilize a clean black, top of the line, Electra Sintered Base for maximum speed and ease of p-tex repair. PU Sidewalls provide amplified durability/dampening over traditional UHMW sidewalls, and our trusty poplar/bamboo core provides sustainably harvested pop and stability. From popping pillow lines to spinning off cliffs, the Hatchet will keep you afloat in pow while giving you the versatility to play. 

For the finishing touches on this splitboard, we use active latching Karakoram Ultraclips to help create as close to a solid board feel as possible and limit chatter between sections. Additionally, we design with camber underfoot so that you'll have optimum skin traction for the uphill, and edge-hold on the downhill. A slight shift of the touring bracket forward to create a heavier tail also allows for ease of kick-turns in the skin track.

• Camber - Multi Radial Twin Camber
• Core - Slayer Split 
• Carbon Reinforcement - S Weave, Tip to Tail 
• Topsheet - Rugged Polyamide
• Karakoram Ultra Clips 
• Base - Electra Sintered 
• Layup - Tri-axe Fiberglass
• Sidewalls - PU
• Stitched Tips
• Forged Tips
• Split Tech 
• Rooted Inserts 

Channel-like stance adjustability for splitboards built with inserts. Believe it. This breakthrough in design has riders beyond stoked , and has made Spark Pucks our most popular splitboard accessory.

Looking for a canted option? Check out our Spark Canted Pucks.

Weight: 10.19oz/pr (289g)

Made in-house by Spark R&D. 55mm (12°) and 75mm (18°) wires offer comfortable angles for any skin track. Comes with a heel adapter that screws right into your splitboard inserts, and places your dual height wires right where they need to be, hitting the perfect spot on the heel of your hardboot regardless of size.

Includes: one pair of dual height wires, wire blocks, heel adapter plates, and mounting screws.

Weight: 3.46 oz/ea (98g) - 6.91 oz/pr (196g)

The skins made specially for freeriders: light, excellent grip and glide, with specific Free Ride attachments.

The Click Lock is fitted on the front of the skin making this a universal system. With just 3 screws, you can precisely fit this bracket to all skis, no matter the tip shape and length. With the skin adjusted to the ski length, the POMOCA precision cutter supplied allows you to trim the sides of the skin by automatically releasing the ski edges. Your pair of skins is ready in 10-15 minutes.

When skinning just isn’t an option, post-holing shouldn’t be either. Our collaboration with Verts offers you a split friendly climbing alternative - the first ever splitboard specific snowshoe. The snowshoe has specially designed pucks that work seamlessly with Spark R&D bindings, as well as all other puck compatible splitboard specific bindings.

Size: Compact 18.75 x 8.5 inch (48 x 22cm) footprint

Weight: 1.21lb/ea (548g) - 2.41lb/pr (1095g)