Fox Float 32 NA2 Fork Air Spring Seal Kit

This seal kit is designed for servicing and rebuilding Fox Float 32 NA2 fork air springs, covering all production years. It may include some extra seals not required for your specific model.

Kit Includes:

• Complete set of seals compatible with Fox Float 32 NA2 models (e.g., 803-00-962; list not exhaustive)

• Schrader valve core rated for 800 PSI (replaces stock valve core rated for 350 PSI)

• Upgraded U-cup shaft seal

Important Notes:

• The suspension unit must undergo mandated stand testing to verify safety and integrity after seal replacement.

• Service intervals: 50 hours for the air can / 100 hours for the damper, or annually—whichever comes first.

• Oil weight, pressure, volume, shim stack, tuning, bleed, or charge information can be found in the original service, rebuild, or maintenance manual.

Support:

• Technical documentation is typically available on the manufacturer’s website or through other open-source resources.

• If you cannot find specific information, contact us with detailed information about your fork, and we will assist you.

This kit provides everything needed to properly service your Fox Float 32 NA2 air spring while ensuring optimal performance and safety.