SRAM/Avid Disc Caliper Mounting Hardware is a set of bolts and washers for mounting a disc brake caliper to your frame or fork.

What it's for

Use it to replace lost or damaged caliper bolts, or when you move a caliper to a new frame, fork, or adapter.

How it works

CPS (Caliper Positioning System): a stack of convex and concave washers under the bolt head that lets the caliper tilt slightly so it lines up with the rotor.

SRAM specifies CPS washers for calipers with inline mounting tabs. Calipers with offset tabs mount without them unless SRAM says otherwise.

Setup and installation

• Post mount: SRAM calls for 9 to 13 mm of bolt thread engagement
• Flat mount: 5 to 7 mm of bolt thread engagement
• Check SRAM's Caliper Mounting Specifications for your caliper and rotor size

Specs

• Part number: 00.5318.006.000