This is a replacement pair of anti friction devices (AFDs) for the Cast Freetour 1.0 toe piece, in the Touring ISO 9523 version for touring sole boots.

What it's for

The AFD is the sliding plate under the toe of your boot on the alpine toe pedestal. It sets boot height at the toe and lets the sole slide sideways in a release. Touring boots have thicker, rockered, lugged soles, so they need their own AFD.

Compatibility

• Fits: Freetour 1.0 toe pieces with 18/19 or newer Freetour pedestals
• Boot soles: boots that meet the ISO 9523 touring standard, and WTR (Walk to Ride) boots
• Does not fit: Alpine ISO 5355 or GripWalk ISO 23223 soles. Cast makes separate AFDs for those
• Freetour 2.0: uses a different AFD, sold separately by Cast
• Release note: Cast states that release and retention with these boots are affected by the boot's sole material and tread pattern
• How to check yours: the sole standard is molded into the boot sole or shell. If you are unsure, Cast asks you to contact [email protected]

Setup and installation

• Tool: 2.5 mm hex key
• Steps: remove the 2 screws from the pedestal, slide the old AFD back off the pedestal, slide the new AFD on using the slots in the pedestal sides, and refasten the 2 screws
• After any AFD change: have the binding adjusted and tested with your boots before skiing

In the box

• AFDs: 1 pair

Warning

All bindings must be properly adjusted and tested with the boots being used to ensure proper function prior to use.