The Feedback Sports Sport Mechanic is a folding bike repair stand with a 360 degree rotating clamp and a wide tripod base. It arrives fully assembled.

What it's for

A repair stand holds the bike off the ground at working height so the wheels and cranks can spin freely while you clean, adjust, or repair. The Sport Mechanic is Feedback Sports' entry level stand. It folds down for storage or travel and sets up without tools.

How it works

Clamp: the clamp head rotates 360 degrees so you can angle the bike. A spinner knob closes the rubber coated jaws on the seatpost or a frame tube

Height: the mast telescopes to set the clamp between 41 in and 66 in

Base: tripod legs spread to a 54 in (137 cm) base with rubber coated end caps

Z-Knob fittings: hand knobs lock the legs and mast, so setup needs no tools

Compatibility

• Tube size: clamps tubes up to 1.9 in (4.8 cm) in diameter. Maximum jaw opening is 3 in
• Bike weight: maximum load is 85 lb. Feedback Sports says the stand is optimized for bikes up to 35 lb
• Bike types: light electric bikes, enduro and trail bikes, XC and hardtail mountain bikes, road, gravel, and cyclocross bikes, urban, touring, and commuter bikes, and kids bikes
• How to check yours: clamp the seatpost when you can. It is round and strong. Measure the seatpost or tube and make sure it is 1.9 in (4.8 cm) or smaller

Specs

• Weight: 12.5 lb (5.7 kg)
• Max load: 85 lb
• Clamp height: 41 in to 66 in
• Base width: 54 in (137 cm)
• Folded size: 5 x 8 x 45 in (13 x 20 x 115 cm)
• Clamp head: aluminum
• Mast: powder coated steel
• Tripod legs: aluminum
• Warranty: 3 years

You will also need

• A travel bag is sold separately by Feedback Sports