Galfer disc brake pads in the Standard G1053 compound, part number BFD427G1053, in the pad shape used by the Avid Elixir family and the SRAM brakes named in the title.

What it's for

These are replacement pads for a hydraulic disc brake. Galfer describes G1053 as its multipurpose compound for all conditions, balanced between power, noise, and durability, with progressive and consistent braking. Galfer lists it for XC, DH, enduro, electric bike, gravel, and road use.

How it works

Compound: G1053 is an organic semi metal compound made without asbestos.

Galfer ratings: Braking power 5 of 5, performance in extreme conditions 4 of 5, fading resistance 5 of 5, durability 5 of 5.

Compatibility

• Fits (per product title): Avid Elixir 1, 3, 5, 7, XO, XX and SRAM DB, XO, X7, X9, XX.
• How to check yours: Pull one of your current pads and compare the backing plate shape. Pad shape is specific to the caliper, not to the bike.

Setup and installation

• Bed in: Galfer says to break the pads in by braking sparingly and gently, letting the system cool, for about 2 minutes downhill or 20 to 25 stops per wheel, until the friction surface is fully marked on the rotor.
• Service: OMG's bike shop can install and bed in pads.

Specs

• Compound: Standard G1053, organic semi metal
• Galfer part number: BFD427G1053
• Pad shape: FD427