The Osprey Reservoir Hose is a flexible 0.25 in (6.35 mm) drink hose that adds to or replaces the hose on any Osprey Hydraulics reservoir system. You trim it to length.

What it's for

Replacing a worn, kinked, or stained hose, or fitting a hose to a different pack routing.

How it works

Hose: Osprey's Hydraulics owner's manual describes the system hose as flexible 0.25 in (6.35 mm) TPU that resists kinks and allows fast water flow.

Routing: Hydraulics reservoirs have built in hose guides so the hose can run to the right or the left side of the pack.

Compatibility

• Fits: Any Osprey Hydraulics reservoir system
• Hose size: 0.25 in (6.35 mm)
• How to check yours: Look for the Hydraulics name on your reservoir.

Setup and installation

• Length: Trim the hose to size for your pack, then connect it to the reservoir system.

Care and service

• After each use: Osprey's Hydraulics owner's manual says to rinse the reservoir system after every use.
• Washing: Use warm soapy water. The manual says not to use bleach or boiling water.

Specs

• Diameter: 0.25 in (6.35 mm)
• Weight: 0.09 lb
• Osprey part number: 10000641