The Vittoria Martello Enduro Race is a 29 x 2.4 enduro racing tire for dry and mixed terrain, with a soft Graphene and Silica compound and a reinforced Tubeless Ready casing.

What it's for

Vittoria builds the Martello Enduro Race for enduro racing on dry and mixed terrain, with a focus on technical sections and off camber trail.

Features

• Block shape: Square blocks modeled on motocross tires
• Progressive siping: Sipes of different widths leave thick and thin edges on each knob, which balances trail feel with grip
• Knob spacing: Wide gaps between knobs clear loose, loamy soil and mud

How it works

1C Race compound: A single compound tread that is soft, tacky and supple. Vittoria adds Graphene and Silica to raise grip, cut vibration chatter and give the rubber an elastic rebound on technical ground.

Enduro Race casing: A multi layer nylon casing. It has a breaker strip under the center of the tread and a puncture resistant layer that runs from bead to bead.

Bead Shield: An extra layer at the bead that protects the tire where it meets the rim.

Sidewall stability insert: A rubber insert in the lower sidewall that supports the tire in corners and protects against rim strikes.

Tubeless Ready: Runs without a tube using sealant. Vittoria publishes a hookless rim compatibility chart on the product page, so check it if your rims are hookless.

Compatibility

• Fits: 29 in (622 mm) tubeless compatible rims
• How to check yours: Confirm frame and fork clearance for a 2.4 in tire

Specs

• Size: 29 x 2.4
• ETRTO: 60-622
• Weight: 1,290 g
• Color: Black
• Compound: 1C Race with Graphene and Silica
• Casing: Enduro Race nylon
• Tubeless: Tubeless Ready

You will also need

• Tubeless setup: Tubeless rim tape, tubeless valve and sealant
• Shop install: OMG's bike shop can mount and seal tubeless tires