What it's for
Lubricating and cleaning bike chains in wet, dry, dusty or muddy conditions. One lube covers the jobs of a dry lube, a wet lube, a chain cleaner and a drivetrain treatment. It also works on hubs, cables and pulley wheels.

How it works
Synthetic formula: About 95% lubricant and 5% carrier fluid. It binds to the chain's metal surfaces and forms a protective film that limits chain and chainring wear.
Cleaning additive: An additive that acts like a detergent works into the gaps in the chain. It lifts dirt and grime to the surface so you can wipe it away.
Low viscosity: It flows like a dry lube, which picks up less dirt, but carries the lubricant content of a wet lube.

Features
- Cleans, lubricates and protects chains in one application
- Made for all riding conditions and weather
- Suited to modern drivetrains, including Shimano HG+ chains
- No chain cleaning needed before the first application
- Ball bearing inside the bottle for mixing
- Made in the USA

Compatibility
All bike chains. Also works on hubs, cables and pulley wheels.

Setup and installation
1. Shake the bottle for 30 seconds.
2. Apply one drop to each chain roller on the top run of the chain, between the derailleur and the chainring.
3. Backpedal 20 to 30 times.
4. Wipe the chain with a microfiber cloth until it has a light sheen.
5. Ride. The chain may look dirty after the first few rides as WT-1 lifts out old grime. Wipe it down.

Care and service
Reapply at least every 400 miles, and sooner in wet or dusty conditions. Wipe excess lube off hubs, cables and pulleys.

Specs
Volume: 0.5 fl oz
Weight: 20 g, bottle with liquid
Type: Synthetic chain lube and drivetrain treatment
Made in: USA

In the box
1 WT-1 Chain Lube, 0.5 fl oz bottle

You will also need
Microfiber cloth

Pairs with
Wolf Tooth WT-1 Chain Lube Precision Needle Applicator
Wolf Tooth WT-1 Chain Lube, 2 fl oz